Automatic High Speed Nail Making Machine Manufacturer Wire Nail Production Line with The Best Quality to Ethiopia

Product Description

High Speed Nail Making Machine Nail Manufacturing Machine

_{The machine is a high-speed energy-saving nail-making equipment, mainly used for high-quality pneumatic nail and ordinary loose nail production. Especially apply to coil nails and strip nails production under requirement of small diameter, big nail head, consistent nail shank.}

 

^{About Machine}

<sup>1. Long service life,no less than the traditional common nail making machine, for at least seven years.White belt at low cost and long life which is 5-6 months without an incorrect operation.

2. Automatic oiling , few lubrication points,much less than traditional machines and other nail making machines on market. It is still very tidy when operating.

3. High Production. 30% more capacity than other factory machine.

4. No dismantle if not change nail mold specifications which can work for 3 months. Nail cutter 8-10 months. Punch time is five times than ordinary equipment depending on the actual using status.

5. Nail cutter do cutting without touch, shear number can reach at least 800 million times (8,000,000 is the cutting times of wire diameter 2.0 mm, rough wire diameter will multiplied); low noise and no power waste can bring low consumption of nail mold, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.

6. Super energy-saving: actual consumption of High- speed nail making machine is about 7 KW,1 ton nail output can save electricity about 20 degrees; while 2.5 sets of ordinary nail making machine consumption is 5-6 KW due to long slide stroke and multi sliding friction parts

7. 60% labor saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost</sup>

 

Specification

Model	LJ-ZDJ-X50	LJ-ZDJ-X90	LJ-ZDJ-D90	LJ-ZDJ-X130	LJ-ZDJ-X150
Nail diameter	1.9-3.0 mm	2.0-3.5 mm	2.0-3.5 mm	2.4-4.0 mm	2.5-4.8 mm
Nail length	32-60 mm	45-90 mm	45-90 mm	70-130 mm	70-150 mm
Speed	≤ 800 pcs/min	≤ 760 pcs/min	≤ 680 pcs/min	≤ 680 pcs/min	≤ 700 pcs/min
Rated power	7 kw	7 kw	7 kw	7 kw	14 kw
Dimensions (mm)	1350*850*1170 1500*800*1600	1350*1220*1050 1500*800*1600	1350*1220*1050 1500*800*1600	1350*1220*1050 1500*800*1600	1650*1250*1300 1500*800*1600
Weight	2200kg	2800kg	3000kg	3000 kg	4500kg

Details:


 

^{Main Advantages}

_{Compared with common machine, ours has below advantages mainly:}

_{1. Defective rate is below 1/100,000;}

_{2. 1 worker can operate 10 machines at same time and skillful worker is not need because of easy operation & maintain;}

_{3. Labor cost saved 50% - 70% for nail making;}

_{4. Labor cost saved 35% - 45% for coil nail making;}

_{5. Us$18 can be saved to produce 1 ton nails (in China);}

_{6. High pressure air pump is not needed;}

_{7. Spare parts have long service life with low prices.}

Packing & Delivery

 

OUR FACTORY

HEBEI PROVINCE LAIJI machine.en.made-in-china.com was found in 1999. It covers an area of 5800 square meters. It is located in Anping County-wire mesh town, which is the largest production base of wire mesh in Asia, It is very convenience, 260km south of Beijing,120km west of Shijiazhuang,240km east of Tianjin.  

OUR TEAM